Home > Knowledge > Content

Selection of cylinder liner for Stainless Steel Honed Tube and the way of solid impurities

Dec 24, 2022

The Stainless Steel Honed Tube plays a very important role in the hydraulic system during use. Its transmission pressure, lubrication, cooling and sealing are all important links in the work of the piston rod, and the use of hydraulic oil directly affects the hydraulic system. Whether it fails early and the main reason for its durability.

During the selection process of Stainless Steel Honed Tube, we will select the appropriate piston rod for the hydraulic system, and we should also select the appropriate hydraulic oil according to the grade specified in the piston rod instruction manual. In case of special circumstances, we should also try our best to find a substitute oil whose performance is consistent with the performance of the original brand.

The clean hydraulic oil in the piston rod is the source of life of the entire hydraulic system. In the piston rod hydraulic system, there are many precision coupling parts, some have gaps, and some have small damping holes. When the solid impurities in the deteriorated oil invade the piston rod, It will lead to a series of situations that endanger the safe operation of the hydraulic system, such as straining of precision couplings, card issuance, and blockage of oil passages.

The way for Stainless Steel Honed Tube to produce these solid impurities is often caused by unclean hydraulic oil, unclean refueling tools, careless refueling and maintenance, and desquamation of hydraulic components. Therefore, to avoid these problems, we must start from the source Carry out effective checks and controls.

The selection of the piston rod in our daily practice is to effectively clean and dry the piston and cylinder liner, apply a layer of clean engine oil on the respective working surfaces, stand the cylinder liner upright with the top of the piston facing down, and use the right hand to stably into the cylinder liner. If the piston falls slowly, it means that the gap between the piston and the cylinder liner is well matched; if it does not fall, the gap is too tight; if it falls too fast, it means that the gap is too large.

Stainless Steel Honed Tube improves the corrosion resistance of its product surface during operation, which can effectively delay the occurrence or expansion of fatigue cracks to a certain extent. Its rolling surface forms a layer of cold work hardening layer, which reduces wear and tear Elastic and plastic deformation of the contact surfaces of cutting pairs.


Send Inquiry
Contact Us