Linear bearing shaft has the characteristics of light weight, interchangeability, corrosion resistance and low cost in the process of use, and is widely used in various machine equipment. Linear bearing shaft can play its performance to a certain extent. When used, it can achieve the economic benefits of furnace saving and automation.
The metal linear shaft is mainly a low-cost linear motion system during operation, and it is mainly used for infinite travel and cylindrical shafts when used.
Plastic linear shaft is a linear motion system with self-lubricating properties.
The difference between the two types of linear bearings is that the metal linear shaft is rolling friction, and the point contact between the bearing and the cylindrical shaft, so it is suitable for low-load high-speed movement; standard type of linear shaft, clearance adjustment type linear bearing, open type linear bearing, extended Type linear bearings, general purpose linear bearings. Flange linear bearings can be divided into: round flange type, square flange type, oval flange type, guided round flange type, guided method flange type, guided oval flange type, and extended round flange type.
The specifications of the linear shaft include LM and LME, LIN-11 and LIN-12, and KH series, and the outer diameter tolerance of the used linear shaft is generally h7. The LME series are mostly used in Europe, America, Germany, Italy and other regions. The inch size is used as the standard, and the metric size is also available. The outer diameter tolerance of the linear shaft used is generally g6. LIN-11 represents the European standard plastic linear shaft, which is installed with a circlip limit, while the LIN-12 series is a narrow design, directly using its outer diameter to fit tightly with the hole of the mounting seat, mainly to save installation space.






