The advantages of linear bearings are that they have low cost, high corrosion resistance, good interchangeability and lightweight. Therefore, they are widely used in supporting various major machinery. They can not only give full play to their performance, but also effectively To achieve the economic benefits of automation and labor saving. Someone must have asked, what is a linear axis, how to install a linear axis, and what are the specifications of a linear axis?
The metal linear axis is a linear motion system produced at a lower cost and can be used with unlimited cylindrical axes. The plastic linear axis is a lubricating linear system. The difference between these two linear axes is that the metal linear axle uses rolling for friction, while there is only point contact between the cylindrical axis and the bearing, so it is more commonly used in low-load, high-speed motion. The plastic linear axis is different. It uses sliding friction, so the cylindrical shaft and the bearing are basically in surface contact, so it is more suitable and widely used in low-speed operation under high loads.
When we install the linear axis, we must first clean up any dirt or burrs on the mechanical mounting surface. Because the linear axis is coated with anti-rust oil, the oil must be cleaned before installation. Because the anti-rust oil has been cleaned before, the equipment may rust during future use. It is recommended You can wipe a little lubricating oil on the main shaft and install the auxiliary rail in the same way.
There are actually many specifications of linear axes, and you can choose according to your own requirements when choosing.
Introduction and installation method of linear axis
Sep 28, 2023
Send Inquiry
Categories
Contact Us
- Tel: +8613861835411
- Email: andsonying@163.com
- Email: andsonying@wxboton.com
- Add: 2 Luxi Road, Yangshan Industrial Zone, Huishan District, Wuxi City, Jiangsu, China






