For the welding of the piston rod, it is recommended that you use friction welding, which is finished product welding, or welding after chrome plating, and the cylinder can be directly installed after turning and flashing. This welding technology has been very mature abroad, and many This welding method is adopted by foreign enterprises. Next, we will introduce the advantages of this welding method.
1: The cost of this welding technology is much lower than that of ordinary welding, because it only needs to consume electricity and does not require any flux;
2: The welding efficiency is also very high, and it can be successfully welded in just two or three minutes;
3: The quality of welding is also much better than ordinary welding technology, and the strength of the weld after welding is basically close to the matrix;
4: This welding technology is not only safe, but also environmentally friendly, because there is no sound during the welding process, and there will be no gas, light or radiation pollution.
The above four points are enough to explain the advantages of using friction welding. Many large foreign companies use this friction welding to weld piston rods. Although it is still relatively rare in our country, the advantages of friction welding are very obvious, so it is believed that friction welding will become popular in China in a short period of time.
Advantages of Friction Welding Piston Rods
Aug 28, 2023
Send Inquiry
Categories
Contact Us
- Tel: +8613861835411
- Email: andsonying@163.com
- Email: andsonying@wxboton.com
- Add: 2 Luxi Road, Yangshan Industrial Zone, Huishan District, Wuxi City, Jiangsu, China






