Home > Knowledge > Content

How to solve the telescopic problem of the piston rod?

Oct 11, 2022

In the process of using the piston rod, we will encounter telescopic problems, but if we can't solve it well, it will be a hassle for our entire operation. So how should we solve it? You might as well share your opinions, maybe you will find the answer, how should we solve this scaling problem?

1. Telescopic

When we telescopically handle the piston rod, we need to control the oil circuit. Of course, we also need to test its pressure. If it is normal, then we can judge that there is no problem in this place. We also need to see if there is any problem with the oil volume of the hydraulic oil tank. If the oil volume is sufficient, we will also take out the oil return filter element inside and test the output force of the main pump. If the pressure is normal, it may be caused by the iron filings absorbed by the filter element. If your safety valve is faulty, then we can't operate it with a stainless steel piston rod, because his pressure is a problem.

2. Problem solving

If the valve core in the piston rod is stuck, then the stainless steel piston rod will automatically extend. Of course, the seals in it may be damaged. We also need to test the rod cylinder to see if there is any leakage. We will not introduce the specific method. If there is a problem with him, we can replace him. Of course, we need to clean the hydraulic oil tank, replace the hydraulic oil and other substances, and test the machine to see him. How about the performance, if it returns to normal, then we can operate on it.

What we are talking about is only a small part of the piston rod. If we want to make full use of it, there is still a lot of knowledge we need to master. If we cannot carry out our work well, then for our production and Operation will have a small impact.

www.rodandtubechina.com
Send Inquiry
Contact Us