The function of the piston rod is to act as a movable plug in the cylinder, forming the bottom of the combustion chamber. There is an airtight seal between it and the cylinder wall. So the way the hot combustion gas expands is to force it down. It is the rotating crankshaft that pushes the piston rod back into the cylinder and the cycle repeats.
More than 60% of the friction in an engine comes from the movement of product components, which is a major factor in increasing engine efficiency.
A large force is generated during the direction change of the up and down movement of the piston rod. Lighter components have less momentum, so less force is applied, which means a constant push is required to reduce the weight of the connecting rod and piston.
The piston rod is connected to the crankshaft by a connecting rod, which is usually shortened to a connecting rod or connecting rod. Together these artifacts are called components. Both ends of the connecting rod are free to pivot: the part of the connecting rod that connects to the stainless steel piston rod is called the small end, and the end that connects to the crankshaft is called the big end. The big end will have bearing inserts that reduce friction and maintain accurate oil clearance with journals on the crankshaft.
www.rodandtubechina.com






