1. Micrometry.
Micrometry is a method for measuring the straightness of the piston rod, which is mainly used to measure the straightness of the cylindrical voxel line or axis.
2. Appropriate method.
The appropriate method used to measure the straightness of the piston rod is mainly based on the principle of comparing the measured element with the ideal element.
3. Pitch method.
The pitch method is generally suitable for the measurement of long parts. For example, when the measured length of the piston rod is divided into several small sections, we can use instruments such as a spirit level and an autocollimator to measure the relative reading of each section. And then through the relevant data processing to get the straightness error.
4. The data acquisition instrument is connected to the dial indicator method.
The measurement principle of the piston rod straightness data acquisition instrument connected to the dial indicator method mainly refers to reading the maximum and minimum values of the piston rod measurement data from the data acquisition instrument and the dial indicator. Then, according to the calculation software in the data acquisition instrument software, the straightness error of the product is automatically calculated. This method can effectively reduce the error caused by manual reading.






