Analysis of the hardness and other advantages of the chrome plating layer of the hydraulic piston rod
1. The hard chromium electroplating coating is bright and meticulous, and is firmly combined with the substrate. Coating hardness can be as high as HV1100. The amount of non-corroding anode is small: the ratio can reach 80:1. The cathode current efficiency is 22~35%, the deposition speed is fast, and the electric energy is saved. The coating is smooth, uniform in thickness and strong in dispersion.
2. Stable process, simple maintenance, easy operation and direct conversion. Does not contain fluoride, and does not corrode the workpiece substrate in the low current density area of the cathode. The number of micro-cracks in the hard chromium electroplating coating is more than 2000/cm, and it has high corrosion resistance.
3. Hard chrome plating can improve the surface brightness and hardness of the mold, making the surface smooth and bright, with corrosion resistance, high temperature resistance, wear resistance, anti-rust, easy demoulding, non-stick mold and other effects. The molds processed by our company, The mold can withstand high temperature of 600-800 degrees Celsius, and can reach 60-65HRC (hardness). The finish can reach GB1031-63-n14 standard. It is not easy to be damaged, cracked and dechromed under normal maintenance and use. Thereby prolonging service life, improving quality, reducing material cost and improving production efficiency. In addition, it can be plated and matte. It is especially effective when applied to copper tubes of continuous casting molds. Significantly increase the amount of passing steel.
4. Hard chrome plating can ensure the improvement of the surface hardness and brightness of the mold, greatly improve the anti-rust ability, anti-corrosion ability and wear resistance of the mold, and improve the surface hardness and brightness of the mold. The durable value of the mold, the added value of the appearance of the plastic product is 3-4 times that of the untreated mold.






