Home > Knowledge > Content

Why is there no oil in the oil inlet of the hydraulic cylinder?

Mar 21, 2022

If there is no oil at the oil inlet of the hydraulic system during operation, it will definitely affect its normal operation. In order to ensure that the working efficiency of the hydraulic system is not affected, you can follow the editor to take a look. What are the methods to prevent the problem of no oil at the oil inlet of the hydraulic system?

 The hydraulic pump of the hydraulic press is an important part of the hydraulic system, and it is also one of the most prone to failures. Especially, the lack of oil at the oil inlet of the hydraulic pump is a relatively common fault. Then, what should be done when the oil inlet of the hydraulic pump is empty of oil? Woolen cloth? How to do this preventive work? Let's find out together:

What's the matter with the oil inlet of the pump running out of oil?

If the oil inlet of the pump is free of oil, air will enter the pump body directly. If the oil inlet end of the vane pump is not tightly sealed, the oil seal at the piston rod of the hydraulic cylinder or the pipe joint is not tightly sealed, and when the piston rod shrinks into the cylinder, air will be brought into the hydraulic system.

 Preventive measures: Regularly check the oil level in the fuel tank, so that it is not lower than the oil return port; check the oil pipe and damping pipe to ensure that there is no damage everywhere; check the sealing of the piston rod and pipe joint to achieve the expected sealing effect; check Make sure that there is enough oil at the oil inlet

www.rodandtubechina.com

Send Inquiry
Contact Us