For hydraulic cylinders, the possibility of leakage is very large. In order to prevent the adverse effects, it is necessary to do a good job of corresponding leakage prevention and leakage control measures to ensure the normal stability of the hydraulic system.
As one of the reasonable methods to prevent leakage, the total number of oil pipe joints and flanges in the hydraulic system should be avoided as much as possible. Therefore, accumulative valves, cartridge valves, and flat valves must be generally used in the formulation. way to reduce pipeline leaks. The second is to assemble the hydraulic valve table in the hydraulic system in an area close to the implementation components, which can greatly shorten the total length of the hydraulic press pipeline, thereby reducing the total number of pipe joints.
Because the impact and vibration analysis of the hydraulic press will also immediately or indirectly damage the system software, resulting in the loosening of the pipeline connection and causing leakage, the commutation time should be increased as much as possible when the working conditions allow. The actual behavior is to have a buffer groove on the angle valve, a buffer cone configuration, or a pressure regulator in the valve to increase the commutation time.






