Electroless plating is a technology that uses the oxidation-reduction chemical reaction in the solution to deposit metal. It usually refers to the surface processing method that restores the metal ions in the solution to metal and deposits on the surface of the body to form a metal coating without the effect of an applied current. The electroless Ni-P alloy amorphous coating has excellent performance and can significantly improve the hard plating, wear resistance and corrosion resistance. The piston rod can replace hard chromium plating. The characteristics of electroless plating are simple equipment, no need for electroplating power supply, uniform thickness of coating can be obtained for workpieces of various shapes, low aging treatment temperature, and small deformation.
The principle of electroless Ni-P alloy plating, hypophosphite ion catalysis, oxidation release of active atomic hydrogen is the first step in the deposition process: H2PO2-+H2O→HPO32+H++2Hxi Ni2+ and H2PO2- are adsorbed on the surface of the body Hydrogen atoms are recovered to obtain Ni-P alloy accumulation layer: Ni2++2Hxi→Ni+2H+ H2PO2-+Hxi→H2O+OH-+P together absorb hydrogen atoms and recombine to release hydrogen gas: 2Hxi→H2↑The total reaction formula derived from this For: Ni2++H2PO2-+H2O→Ni+P+HPO32+H+H2↑
According to the above, the difference between chemical deposition Ni-P alloy and electroplating is that electroplating uses electric energy to restore metal cations to metal and deposits them on the cathode, while electroless plating uses chemical restoration method to make nickel under the condition of no DC power supply. The cations revert to metallic nickel and deposit on the catalytic metal surface. Because metals and alloys such as iron and nickel have catalytic effects, the above alloy materials can be deposited with Ni-P alloys. The parts are uniformly carried out one after another, so as to obtain a certain thickness of Ni-P alloy coating. When the phosphorus content of the coating is high, usually 8% to 13.5%, the coating structure is amorphous. This structure does not have organizational defects such as grain boundaries and dislocations, and intergranular corrosion and stress corrosion will not occur. The coating provides better corrosion resistance than the electroplating layer.
Because the hardness of the Ni-P alloy coating is relatively high, the hardness of the coating is 500~600HV in the stacked state, and 980~1100HV after heat treatment at 400°C, so it has the same or better wear resistance than hard chrome plating.
Electroless Ni-P alloy plating is widely used in industry, but it is rarely used in construction machinery industry, so we apply electroless plating technology to hydraulic cylinder piston rods of engineering cranes to replace the wear resistance of hard chrome plating.






