Home > Knowledge > Content

Classification and installation requirements of linear motion shaft

Feb 25, 2023

The linear motion shaft has a certain degree of interchangeability, light weight and low cost in the process of use. The product is widely used in various machine equipment, and can effectively achieve labor saving on the basis of its excellent performance. and the economic benefits of automation.

In general, the metal linear shaft is a low-cost linear motion system when it is used. It is mainly used for its infinite stroke and cylindrical shaft in use. The plastic linear bearing is a self-lubricating feature. linear motion system.

The difference between the linear shafts of the above two materials is that the metal linear bearing is rolling friction, and there is point contact between the bearing and the cylindrical shaft, so it is suitable for low-load high-speed movement; while the plastic linear bearing is sliding friction, and the contact between the bearing and the cylindrical shaft is Surface contact, it is suitable for high load and low speed movement.

The flange type linear shaft can be effectively divided into guiding method flange type, elliptical flange type, extended round flange type, round flange type, guiding round flange type, etc. in the process of use. The specifications of LIN-11 and LIN-12 as well as LM and LME several major series.

Before the linear shaft is installed, the dirt, surface scars and burrs on the mechanical installation surface must be effectively removed. The linear shaft needs to be coated with anti-rust oil before installation. Please clean the reference surface with cleaning oil before installation. After reinstallation, usually the base surface is easy to rust after removing the anti-rust oil. It is recommended to apply lubricating oil to the spindle with low viscosity.

The linear axis needs to be gently placed on the creation table. During use, lateral fixing screws or other fixing fixtures are required to make the line rail and the lateral installation surface gently fit. It is necessary to effectively confirm its position before installation and use. Whether the screw holes match.

https://www.rodandtubechina.com

Send Inquiry
Contact Us